LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (General Electrical System - Repair) >> Switch >> 61 31 176 Removing and installing/replacing emergency call button

61 31 176 Removing and installing/replacing emergency call button

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Lever out housing (1) with special tool 00 9 317 as illustrated.

Unlock emergency call button plug connection underneath and disconnect.

Remove complete housing (1) from panel for rear storage box (2).

Fig 1: Removing Complete Housing
G03298507Courtesy of BMW OF NORTH AMERICA, INC.

Unclip emergency call button (1) in direction of arrow from housing (2) and remove.

Fig 2: Uncliping Emergency Call Button
G03298508Courtesy of BMW OF NORTH AMERICA, INC.