11 31 001 Replacing camshaft (M52TU / M54 / M56): Notes

WARNING: This page is about a different car, the 2005 BMW Z4, 2004 BMW Z4, and 2003 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 250
11 2 300
11 3 240
11 3 244
11 3 250
11 3 260
11 3 292
11 4 220
11 6 150
11 6 180

(if necessary inlet or exhaust side)

The inlet or exhaust camshaft can be replaced in the vehicle.

IMPORTANT: Incorrect assembly/removal without special tools exposes the camshaft to the risk of preliminary damage or breakage. The valves may also be bent by contact with the piston crown. Comply without fail with the job instructions, recommended special tools and work sequence.