34 11 Front Brake
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
34 11 FRONT BRAKE TIGHTENING SPECIFICATION
| Application | Type | Thread | Measure |
|---|---|---|---|
| 1AZ Brake disk to wheel hub (contact faces between brake disk and wheel hub cleaned and grease - free) | All | 16 Nm | |
| 2AZ Brake caliper to steering knuckle (screws lightly oiled, contact surfaces between brake caliper and steering knuckle cleaned and grease-free) | E34, E36, E32, E31, E38, E39, E46, E52, E53, E30 / 325iX, E65, E66, E67, E83, E85, E60, E61, E63, E64 | 110 Nm | |
| 2AZ with aluminum brake caliper | E31 | 115 Nm | |
| E12, E21, E23, E24 to 5.82 | 95 Nm | ||
| E28, E30, E24, from 5.82 | 123 Nm | ||
| 3AZ Guide bolt | All | wrench size 7 mm | 30 - 5 Nm |
| 4AZ Bolts to guidepin (always replace) | E30 | 35 Nm | |
| 5AZ Protective plate to steering knuckle | E85, E83 | M6 | 9 Nm |
| E67, E60, E61, E63, E64, E65, E66 | M6 | 12 Nm |