12 41 Starter and Mounting Parts
WARNING: This page is about a different car, the 2005 BMW Z4, 2004 BMW Z4, and 2003 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
12 41 STARTER AND MOUNTING PARTS TIGHTENING SPECIFICATION
| Application | Type | Thread | Measure |
|---|---|---|---|
| 1AZ Starter motor mounting to transmission bell housing | All | 45 Nm | |
| 2AZ Support to starter | All | M5 | 5 Nm |
| 3AZ Support to crankcase | All | 47 Nm | |
| 4AZ Electrical leads to starter | All | M5 | 5 Nm |
| All | M6 | 7 Nm | |
| All | M8 | 13 Nm | |
| 5AZ Bolt connection, pole tube | All | M6 | 6 Nm |
| 6AZ Heat shield to starter motor | M6 | 6 Nm |