11 13 Oil Pan
WARNING: This page is about a different car, the 2005 BMW Z4, 2004 BMW Z4, and 2003 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
11 13 OIL PAN TIGHTENING SPECIFICATION
| Application | Type | thread | tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Oil drain plug | All | M12 x 1.5 | 25 Nm | |
| All | M18 x 1.5 | 35 Nm | ||
| All | M22 x 1.5 | 60 Nm | ||
| 2AZ Oil pan on engine block | All | M6 8.8 | 10 Nm | |
| All | M6 10.9 | 12 Nm | ||
| N40 / N42 / N45 / N46 | M8 8.8 | Replace screws | 30 Nm | |
| All others | M8 8.8 | 22 Nm | ||
| Oil sump, lower section to upper section | All | M6 8.8 | 10 Nm | |
| All | M8 8.8 | 22 Nm | ||
| Oil sump bottom section to top section with microencapsulated screws | All | M6 10.9 | Replace screws | 12 Nm |