LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 762 (Engine Electrical System - Tightening Torques) >> Starter And Mounting Parts >> 12 41 Starter and Mounting Parts

12 41 Starter and Mounting Parts

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
STARTER AND MOUNTING PARTS TORQUE SPECIFICATIONS

  Type Thread Tightening specification Measure
1AZ Starter motor mounting to transmission bell housing All     45 N.m
2AZ Support to starter All M5   5 N.m
3AZ Support to crankcase All     47 N.m
4AZ Electrical leads to starter        
  All M5   5 N.m
  All M6   7 N.m
  All M8   13 N.m
5AZ Bolt connection, pole tube All M6   6 N.m
6AZ Heat shield to starter motor   M6   6 N.m