11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
CASE COVERS TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Timing case and timing case cover top and bottom | All | M6 | 10 N.m | |
| All | M7 | 15 N.m | ||
| All | M8 | 22 N.m | ||
| All | M10 | 47 N.m | ||
| 2AZ End cover, front/rear, to engine block | All | M6 | 10 N.m | |
| All | M8 | 22 N.m | ||
| 3AZ Bearing pin to timing case cover | M51 / M41 / M47 | M42x1.5 | 65 N.m | |
| 4AZ Screw plug or connection piece to timing case cover Screw plug to timing case cover | M51 / M41 / M47 | M20x1.5 | 30 N.m | |
| Screw plug to timing case cover | M57 / M47TU / M57TU | M30x1 | 70 N.m | |
| Screw plug to timing case cover | M57 / M47TU | M40x1.5 | 30 N.m | |
| 5AZ End cover, top/rear (water jacket), to engine block | N73 | M6 | 10 N.m |