11 12 Cylinder Head with Cover N62
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER N62 SPECIFICATIONS
| Cylinder head height: Original dimension | mm | 133.0 PHY 0.07 |
| Machining limit | mm | 132.7 PHY 0.07 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035 ... 13.993 |