LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 696 (General Electrical System - Tightening Torques) >> Windshield Wipers >> 61 61 Windshield Wipers

61 61 Windshield Wipers

WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
WINDSHIELD WIPERS - TIGHTENING TORQUE SPECIFICATIONS

  Type Thread Tightening specification Measure
1AZ Wiper motor mounting to wiper console E31 LHD / E38 M6   7.5 Nm
  E31 RL / E36     10 Nm
  E39     12 Nm
2AZ Stop for park position to wiper console E31     15 Nm
3AZ Wiper contact pressure motor to wiper console E31 / E32 / E34 / E38 to 04/98     6.5 Nm
4AZ Motor crank to wiper motor E38 M8   21 Nm
  E36 / E39 M8   27 Nm
5AZ Wiper shaft nut to body E31 / E36 / E32 / E34     12 Nm
  E46 / E83     10 Nm
6AZ Holder to firewall E31 / E46 / E83 M6   10 Nm
Wiper bracket to firewall E36 Coupe/ E38 / E39     10 Nm
7AZ Upper cowl panel support E31 M4   5 Nm
8AZ Wiper support bracket to firewall E36     10 Nm
9AZ Wiper support bracket to wiper console E36     10 Nm
10AZ Wiper arms        
Driver's side E31/E39     40 Nm
  E38 from 04/98     25 Nm
  E46 / E83     30 Nm
Driver's side without ADV (contact pressure adjustment) E32 / E34 E36 / E38to 04/98     25 Nm
Driver's side with ADV (contact pressure adjustment) E32 / E34     21 Nm
  E38to 04/98     40 Nm
Passenger's side E31 / E32 / E34 / E36 / E38 / E39     25 Nm
  E46 / E83     30 Nm