12 31 Alternator with Drive and Mounting Parts
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
ALTERNATOR WITH DRIVE AND MOUNTING PARTS SPECIFICATION
| Application | Type | Thread | Tightening specification |
|---|---|---|---|
| 1AZ Wires to alternator | |||
| Terminal D+ | M10/M20 | 5 N.m | |
| All/others | M6 | 7 N.m | |
| Terminal B+ | S38/B38 | 8 N.m | |
| All/others | M8 | 13 N.m | |
| 2AZ Pulley | All | 45 N.m | |
| 3AZ Pulley (ribbed drive belt) | Alternator with cooling jacket | 80 N.m | |
| all others | 70 N.m | ||
| N42, N46 Valeo | 75 N.m | ||
| N42, N46 Bosch | 65 N.m | ||
| 4AZ Rear holder | All | 3.5 N.m | |
| 5AZ Fillister head screw for wire holder | All | 3.5 N.m | |
| 6AZ Alternator on bearing block | M40/M42/M43/M44 | 43 N.m | |
| 7AZ Alternator to crankcase | N42, N46, N62 | M8 | 21 N.m |
| 8AZ Belt pulley (ribbed V-belt) with freewheel (Ina) fitted to Bosch and Valeo alternators | N42 | 80 N.m |