11 14 Case Covers
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
CASE COVERS SPECIFICATION
| Application | Type | Thread | Tightening Instructions | Measure |
|---|---|---|---|---|
| 1AZ Timing case & timing case cover top & bottom | All | M6 | 10 N.m | |
| All | M7 | 15 N.m | ||
| All | M8 | 22 N.m | ||
| All | M10 | 47 N.m | ||
| 2AZ End cover, front/rear, to engine block | All | M6 | 10 N.m | |
| All | M8 | 22 N.m | ||
| 3AZ Bearing pin to timing case cover | M51/M41/M47 | M42x1.5 | 65 N.m | |
| 4AZ Screw plug or connection piece to timing case cover Screw plug to timing case cover |
M51/M41/M47 | M20x1.5 | 30 N.m | |
| Screw plug to timing case cover | M57/M47TU/M57TU | M30x1 | 70 N.m | |
| Screw plug to timing case cover | M57/M47TU | M40x1.5 | 30 N.m | |
| 5AZ End cover, top/rear (water jacket), to engine block | N73 | M6 | 10 N.m |