12 52 Plug Connectors, Terminals
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTORS, TERMINALS - TIGHTENING TORQUE SPECIFICATIONS
| Application | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Holder for modules | E36 | M6 | 9 Nm | |
| 2AZ Ground connections Flange nut | E36 | 16 Nm | ||
| 3AZ Cover on heating splash wall | E36 | 1.1 Nm | ||
| 4AZ Battery positive cap to cylinder head cover | M67 | M5 | 6 Nm | |
| 5AZ Wiring harness (term.50) to starter motor | M57TU / M67 | M6 | 8 Nm | |
| 6AZ Wiring harness (term.30H) to starter motor | M57TU / M67 | M5 | 5 Nm | |
| 7AZ Battery positive lead (term.30) to alternator (B+) | M57TU / M67 | M8 | 15 Nm | |
| 8AZ Cable duct to cylinder head. | M57TU | M6x12 | 4 Nm |