51 61 Reinforcement, Body
WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
REINFORCEMENT, BODY - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 22AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Tension strut in engine compartment | E60 / E61 / E63 / E64 | M8 | Replace screws | |
| Screw connection again | 27 N.m. | |||
| New component / initial screw connection | 30.5 N.m. | |||
| 2AZ Structural tension strut, front | E64 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| E64 | M6 | Replace screws | ||
| Jointing torque | 8 N.m. | |||
| 3AZ Tension strut to rear axle | E60 / M5/ E61 / M5/ E63 / M6/ E64 / M6 | M8 | M8 8.8 | 24 N.m. |
| M8 10.9 | 30 N.m. | |||
| E61/ E64 | M12 | Replace screws | ||
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| E61/ E64 | M8 | Nut | 19 N.m. | |
| 4AZ Tension strut, rear axle, front | E61 / M5/ E64 / M6 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| 5AZ Tension strut, rear axle, rear | E61 / M5/ E64 / M6 | M12 | Replace screws | |
| Jointing torque | 100 N.m. | |||
| Torque angle | 90 ° | |||
| 6AZ Cross strut/rear | E61/ E64 | M10 | Nuts | 41 N.m. |
| Screws | 59 N.m. | |||
| 7AZ Connecting carrier to body (tunnel) | E60/ E61/ E63/ E64/ E87/ E88/ E90/ E91/ E92 / S65/ E93 | M8 | 24 N.m. | |
| E65/ E66 | M8 | 19 N.m. | ||
| E83 | M8 | 23 N.m. |