LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 574 (Body Equipment - Tightening Torques) >> 11 Front Bumper >> 51 11 Front Bumper

51 11 Front Bumper

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BUMPER - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 8AZ)

  Type Thread Tightening specification Measure
1AZ Bumper to bracket E32 M6   9 N.m.
  E36 M8   22 N.m.
  E34 M10   43 N.m.
2AZ Bumper and bracket to impact absorber E31 M10 Install bolts with bolt cement. 22 N.m.
  E38 / E39 / E46 M10   41 N.m.
  E36 M10 Install bolts with bolt cement. 55 N.m.
  E32 / E34 / E30 / Mod. 88 M12   48 N.m.
3AZ Impact absorber/bracket to body E30 / E24     23 N.m.
  E31 / E32 / E34 / E36 / E38 / E39 M6   9 N.m.
  E32 / E34 M10   48 N.m.
  E46 / E52 M8   20 N.m.
4AZ Carrier to body E46 / E65 / E66 / E67 M8   18 N.m.
  E87 / E90 / E91 M8   20 N.m.
  E60 / E61 / E63 / E64 M8   21.4 N.m.
5AZ Carrier to deformation element E85 / E86 M10   38 N.m.
  E85 / E86 M6   8 N.m.
  E83 M8   28 N.m.
6AZ Deformation element to body E85 / E86 M8   19 N.m.
  E83 M8   25 N.m.
7AZ License plate to bumper E46 / E60 / E61 / E63 / E64 / E65 / E66 / E87 / E90 / E91     1 N.m.
8AZ License plate to bumper (thread repair) E46 / E60 / E61 / E63 / E64 / E65 / E66 / E87 / E90 / E91 M5   4.5 N.m.
9AZ Bumper to front end E60 / E61     5 N.m.