32 00 Steering
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760i, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
STEERING GEAR - TIGHTENING TORQUE SPECIFICATIONS (1AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Steering gear to front axle carrier | E21 | 50 N.m. | ||
| E21 Hydro | 41 N.m. | |||
| E12 / E23 / E24 | 42 +/- 4 N.m. | |||
| E28 / E30 / E36 / E46 / E85 | M10 | 42 N.m. | ||
| E38 | M10 8.8 | Press steering gear outwards to stop on front axle support and first tighten both front screws. | 42 N.m. | |
| E32/3 | M10 10.9 | 110 +/- 3 N.m. | ||
| E28 / E32 / E34 / E31 / E24 / from 5.82 | M12 | 80 +/- 8 N.m. | ||
| E38 / E39 with ball-and-nut steering, | M10 10.9 | 62 N.m. | ||
| E53 | M12 10.9 | 100 N.m. | ||
| E39 / E52 with rack -and-pinion steering | Replace screws | |||
| Jointing torque | 50 N.m. | |||
| Torque angle | 90° | |||
| E60, E61 (except AWD) / E63 / E64 / E65 / E66 / E67 | Replace screws | |||
| Jointing torque | 56 N.m. | |||
| Torque angle | 90° | |||
| E60, E61 (AWD) / E83 | M12 | 100 N.m. |