LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Engine And Transmission Mounting - Tightening Torques) >> Engine Suspension >> 22 11 Engine Suspension

22 11 Engine Suspension

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 5AZ)

  Type thread tightening specification Measure
1AZ Engine mount to front axle support E52 / E85     42 N.m.
  E60 / E61 / E63 / E64 / E65 / E66 / E67 M8-8   19 N.m.
  E53 M8-10.9   30 N.m.
  E83 M8   21 N.m.
  E87 / E90 M810.9   28 N.m.
2AZ Engine mount to engine support arm E60 / E61 / E63 / E64 / E65 / E66 / E67 / E53 / E83 / E87 / E90 M10 10.9   56 N.m.
  E65 / E66 / E67 M12 10.9   100 N.m.
  E85 / E52     42 N.m.
3AZ Engine support arm to engine E60 / E61 / E63 / E64 / E65 / E66 / E67 / E87 / E90 M10 8.8   38 N.m.
  E60/61 N52 / E63/64 N52 / E83/85 N52 / E87/ 90 N52 / E65 N52 M12 Aluminum screws marked blue must be replaced Jointing torque 34 N.m.
      Torque angle 90-110 °
  E60 / E61 / E65 / E66 / E67 M8 8.8   19 N.m.
  E85 / E83 M8 8.8   21 N.m.
  E53 (N62/ M54)     38 N.m.
  E53 (M57)     65 N.m.
4AZ Engine mount to mounting bracket E65 / E60 / E61 / E63/E64 M8 8.8   19 N.m.
5AZ Mounting bracket to front axle carrier E65 / E60 / E61 / E63 / E64 M8-8   19 N.m.