LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Engine Electrical System - Tightening Torques) >> Starter With Mounting >> 12 41 Starter And Mounting Parts

12 41 Starter And Mounting Parts

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
STARTER AND MOUNTING PARTS - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 6AZ)

  Type Thread Tightening specification Measure
1AZ Starter motor mounting to transmission bell housing All     45 N.m.
2AZ Support to starter All M5   5 N.m.
3AZ Support to crankcase All     47 N.m.
4AZ Electrical leads to starter        
  All M5   f5 N.m.
  All M6   7 N.m.
  All M8   13 N.m.
5AZ Bolt connection, pole tube All M6   6 N.m.
6AZ Heat shield to starter motor   M6   6 N.m.