12 52 Plug Connectors, Terminals
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTORS, TERMINALS - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 8AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder for modules | E36 | M6 | 9 N.m. | |
| 2AZ Ground connections Flange nut | E36 | 16 N.m. | ||
| 3AZ Cover on heating splash wall | E36 | 1.1 N.m. | ||
| 4AZ Battery positive cap to cylinder head cover | M67 | M5 | 6 N.m. | |
| 5AZ Wiring harness (term.50) to starter motor | M57TU / M67 | M6 | 8 N.m. | |
| 6AZ Wiring harness (term.30H) to starter motor | M57TU / M67 | M5 | 5 N.m. | |
| 7AZ Battery positive lead (term.30) to alternator (B+) | M57TU / M67 | M8 | 15 N.m. | |
| 8AZ Cable duct to cylinder head. | M57TU | M6x12 | 4 N.m. |