11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CASE COVERS - TIGHTENING TORQUE SPECIFICATIONS (1AZ - 5AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Timing case and timing case cover top and bottom | All | M6 | 10 N.m. | |
| All | M7 | 15 N.m. | ||
| All | M8 | 2 N.m. | ||
| All | M10 | 47 N.m. | ||
| 2AZ End cover, front/rear, to engine block | All | M6 | 10 N.m. | |
| All | M8 | 22 N.m. | ||
| 3AZ Bearing pin to timing case | M51 / M41 / M47 | M42x1.5 | 65 N.m. | |
| 4AZ Screw plug or connection piece to timing case cover Screw plug to timing case cover |
M51 / M41 / M47 | M20x1.5 | 30 N.m. | |
| Screw plug to timing case cover | M57 / M47TU / M57TU | M30x1 | 70 N.m. | |
| Screw plug to timing case cover | M57 / M47TU | M40x1.5 | 30 N.m. | |
| 5AZ End cover, top/rear (water jacket), to engine block | N73 | M6 | 10 N.m. |