11 11 Engine Block, Cylinder Crankcase N73/B60
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE - SPECIFICATIONS (N73/B60)
| Bore diameter stage 0 (1) | mm | 89.000+0.014 | ||
| Bore diameter stage 1 (1) | mm | 89.250+0.014 | ||
| Bore diameter stage 2 (1) | mm | 89.500+0.014 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.007 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 | ||
|
||||