11 12 Cylinder Head With Cover N73
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER - SPECIFICATIONS (N73)
| Cylinder head height: Original dimension | mm | 132.5 +/- 0.05 |
| Machining limit | mm | 132.2 +/- 0.05 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035-13.993 |