65 77 558 Removing And Installing/Replacing Control Electronics For Driver's Seat Occupancy Detector
WARNING: This page is about a different car, the 2006 BMW 760Li, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary Preliminary Tasks:
Move seat into "back" and "top" position.
If necessary, cut through cable strap on control electronics (1).
Turn control electronics (1) approx. 45° in direction of arrow and unclip from seat frame.
Disconnect plug connections (2) and remove control electronics (1).