52 25 030 Removing And Installing Complete Armrest For Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Remove center cushion section for rear seat. Refer to 52 25 025 REMOVING AND INSTALLING COMPLETE CENTER CUSHION SECTION FOR REAR SEAT .

Unclip cover (2) in area (1) and remove towards front.

Release screws (3).

Installation:

For tightening torque refer to 52 25 4AZ in SEATS - TIGHTENING TORQUES .

Disconnect plug connections.

Remove armrest (4).

Fig 1: Armrest, Cover, Area, Retaining Screws And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Ski bag or cooler box option:

Unclip cover (2) in area (1) and remove towards front.

Fig 2: Clips Area, Cover And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.