51 23 160 Removing And Installing/Replacing Arrester Hook On Engine Hood

WARNING: This page is about a different car, the 2005 BMW 760Li, 2004 BMW 760i, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Raise bonnet/hood lid.

Release screws (1) and remove arrester hook (2).

Tightening torque, refer to 51 23 1AZ in BODY EQUIPMENT - TIGHTENING TORQUES .

Fig 1: Identifying Arrester Hook

Courtesy of BMW OF NORTH AMERICA, INC.