LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Integrated Suspension Systems - Repair) >> Connecting Lines >> 37 13 ... Notes On Fitting A New Pipe Or A Screw Connection >> Fitting New Pipes:

Fitting New Pipes:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: To avoid leaks in the air spring system, it is essential to avoid scratches on pipes in particular in the connection area!

Pipes are partly integrated in wiring harness.

When faulty pipes are replaced, they must be disconnected at the feed-in to the wiring harness (remaining piece remains incorporated in wiring harness).

Secure new pipes along wiring harness with cable straps.

scientia non olet · About LEMON Manuals