00 00 ... Seat Belts: Checking Condition Of Belt Strap, Function Of Inertia Reel Mechanism, Locking Reel, Belt Buckle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Belt Strap, Retractor Mechanism, Belt Interlock:

Pull out strap and make sure it emerges without jerking.

Check belt strap for:

Folding.
Unravelling.
Pinches.
Cracks and tears.
Traces of melting.

Retract belt strap; here the inertia reel mechanism must retract the strap automatically and without squeaking noises, the last section of the strap may have to be fed in.

Pull out belt strap in short tugs - locking reel must lock.

Belt Buckle:

The tongue on the belt strap must easily snap into place with an audible click.

When the "Press" button is pressed, the tongue must be ejected from the buckle under spring pressure.

NOTE: If the seat belt is damaged, you must replace the seat belt completely after consulting the customer; issue a separate invoice for this work.