12 41 Starter And Mounting Parts
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STARTER AND MOUNTING PARTS (1AZ - 6AZ)
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to transmission bell housing | All | 45 N.m. | ||
| 2AZ Support to starter | All | M5 | 5 N.m. | |
| 3AZ Support to crankcase | All | 47 N.m. | ||
| 4AZ Electrical leads to starter | All | M5 | 5 N.m. | |
| All | M6 | 7 N.m. | ||
| All | M8 | 13 N.m. | ||
| 5AZ Bolt connection, pole tube | All | M6 | 6 N.m. | |
| 6AZ Heat shield to starter motor | M6 | 6 N.m. |