Drive Shaft: Installation

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2001 BMW 540i, 2001 BMW 530i, 2001 BMW 525i, 2001 BMW 330xi, and 2001 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Check splined sections for damage. Replace as necessary. Ensure drive shaft mating marks are aligned.

To install, reverse removal procedure. Add grease to CV joint as necessary. Check splined sections for damage. Replace as necessary.

Fig 1: Removing Joint Disc (Drive Shaft With Rear CV Joint)

Courtesy of BMW OF NORTH AMERICA, INC.