Drive Shaft Constant Velocity (CV) Joint Boot: Installation
WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2001 BMW 540i, 2001 BMW 530i, 2001 BMW 525i, 2001 BMW 330xi, and 2001 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Add grease as necessary. Install new end cover and boot on CV joint. Install washers and CV joint mounting bolts. Pull boot onto drive shaft. Install hose clamp on boot. To complete installation, reverse removal procedure.