11 11 Engine Block, Cylinder Crankcase M54 B 30
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE M54 B 30 TECHNICAL SPECIFICATION
| Bore hole diameter a) | mm | 84.000 +0.010 |
|---|---|---|
|
mm | 84.250 +0.010 |
| Permitted out-of-round of cylinder bore a) | mm | 0.005 |
| Permitted conicity of cylinder bore a) | mm | 0.010 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 |
- new condition or rework