61 31 295 Replacing clutch switch for cruise control system
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
Remove trim panel for pedal assembly.
Press clutch pedal with pedal support down to flow and lock in position.
Disconnect plug connection (1).
Withdraw sleeve (3) in direction of arrow up to stop.
Press both retaining clips together at front end and pull out switch (2) in direction of arrow towards rear.
Installation:
Slowly move clutch pedal to initial position.