12 14 705 Programming control unit (DME / DDE)

WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.

Switch off ignition.

Connect MoDiC or DIS/GT1 Tester.

Switch on ignition.

Select "Programming".

For subsequent procedure, follow instructions in MoDiC or DIS/GT1 Tester.

Carry out adjustment of following control units:

EWS (electronic immobilizer).
DME (Digital Motor Electronics) or,
DDE (Digital Diesel Electronics).

Refer to "Diagnosis and Coding" service information bulletins on subject of programming.