65 52 013 Removing and installing complete on-board monitor (widescreen)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unclip frame of on-board monitor (1) in direction of arrow and remove.

Fig 1: Removing Frame Of On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Pull out complete on-board monitor (2) in direction of arrow.

Fig 2: Locating On-Board Monitor Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and (2) and disconnect.

Remove complete on-board monitor.

Fig 3: Removing Complete On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.