64 52 520 Removing and installing/replacing complete A/C compressor (M54)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Risk of damage!

Follow instructions for compressor replacement without fail.

NOTE:

A/C system is drawn off.

Press ring catch (1) together, detach pressure hose (2) in direction of arrow from shut-off valve (3) and lay to one side.

Fig 1: Identifying Ring Catch, Pressure Hose, And Shut-Off Valve

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) in direction of arrow.

Release screws (3).

Remove lines (2) and (4).

Installation:

Replace sealing rings.

Observe tightening torque, 64 52 1AZ. See A/C COMPRESSOR

Fig 2: Identifying Plug Connection, Screws, And Lines

Courtesy of BMW OF NORTH AMERICA, INC.

Remove front splash guard.

Remove A/C compressor drive belt.

NOTE:

Secure A/C compressor (2) against falling out.

Release screws (1) and remove A/C compressor (2).

Fig 3: Identifying A/C Compressor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.