LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (General Electrical System - Repair Instructions) >> Windscreen Wipers >> 61 61 010 Checking/adjusting approach angle of windshield wiper arms on front windscreen >> Special tools required:

Special tools required:

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Wiping quality is increased if the approach angle of the windshield wiper arms is precisely adjusted.

Place special tool 00 9 331 next to pivot point of windshield wiper blade on windshield.

Fig 1: Identifying Pivot Point Of Windshield Wiper Blade On Windshield
G03269003Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: To prevent the wiper arm from scratching the glass, cover the arm with adhesive tape.
To adjust passenger windshield wiper arm, move it into vertical position.

If contact angle is too large (light gap at top between gauge and wiper blade), grip wiper arm with special tool 00 9 222 and turn in direction of arrow with special tool 00 9 221.

Fig 2: Adjusting Passenger Windshield Wiper Arm
G03269004Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: To prevent the wiper arm from scratching the glass, cover the arm with adhesive tape.
To adjust passenger windshield wiper arm, move it into vertical position.
Fig 3: Adjusting Passenger Windshield Wiper Arm
G03269005Courtesy of BMW OF NORTH AMERICA, INC.

If contact angle is too small (light gap at bottom between gauge and wiper blade), grip wiper arm with special tool 00 9 222 and turn in direction of arrow with special tool 00 9 221.