61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove finisher for preselector lever.

Press out switch for hazard warning flashers/central locking (1) through opening for preselector lever finisher.

Disconnect plug.

Fig 1: Pressing Out Switch For Hazard Warning Flashers/Central Locking

Courtesy of BMW OF NORTH AMERICA, INC.