LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Slide/Tilt Roof - Repair) >> Electrical Sunroof Components >> 54 13 050 Replacing seal for slide/tilt sunroof lid at rear

54 13 050 Replacing seal for slide/tilt sunroof lid at rear

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

NOTE: Follow repair instructions for bonded seals on glass slide/tilt sunroof. Refer to 54 0 ... REPAIR INSTRUCTIONS FOR BONDED SEALS .

Detach seal (1) from slide/tilt sunroof lid.

Installation: 

Clean bonding surface with adhesive remover.

Press seal without stretching (squashing).

IMPORTANT: Do not touch bonding surface. Surface temperature >/= 20° C. Incorrect bonding of the seal will result in leakage.
Fig 1: Detaching Seal From Slide/Tilt Sunroof Lid
G03268830Courtesy of BMW OF NORTH AMERICA, INC.