LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Body Equipment - Repair) >> Rear Lid Trim Panel >> 51 49 080 Removing And Installing/Replacing Cover For Loading Sill (On Rear Lid Lower Section)

51 49 080 Removing And Installing/Replacing Cover For Loading Sill (On Rear Lid Lower Section)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove rear reflector (in rear lid lower section). Refer to 63 14 120 REMOVING AND INSTALLING/REPLACING REAR REFLECTOR (ON REAR LID LOWER SECTION) .

Release left/right screw (1).

Fig 1: Releasing Screws
G03268473Courtesy of BMW OF NORTH AMERICA, INC.

Using a small screwdriver, lever out covers (2) by means of chamfers (1) and release screw underneath.

Fig 2: Removing Covers
G03268474Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover (3) for loading sill.

Installation: 

If necessary, replace faulty cover (1) for button on cover (2) for loading sill.

Fig 3: Replacing Faulty Cover
G03268475Courtesy of BMW OF NORTH AMERICA, INC.