LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Body Equipment - Repair) >> Hood Latch, Locks >> 51 23 265 Removing And Installing/Replacing Left Or Right Gas Strut For Engine Bonnet/Hood

51 23 265 Removing And Installing/Replacing Left Or Right Gas Strut For Engine Bonnet/Hood

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Risk of injury and damage!
For the following tasks, you must take the appropriate measures to support the engine bonnet/hood.
As an alternative, you can enlist the help of a second person to hold the bonnet/hood.

Raise bonnet/hood lid.

Removing gas spring strut at top and bottom:

Fig 1: Removing Gas Spring Strut
G03268264Courtesy of BMW OF NORTH AMERICA, INC.
  1. Push retainer spring to end of gas spring strut.
  2. Remove gas spring strut from ball head.