51 11 154 Removing and installing/replacing attachment for front bumper trim (HP)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to KSD CD for details of preliminary tasks.

Release spring clips (1) in area (2) on left and right.

Fig 1: Releasing Spring Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1) on left and right and remove attachment (2) in direction of arrow.

Fig 2: Removing Attachment

Courtesy of BMW OF NORTH AMERICA, INC.