LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Body Equipment - Repair) >> Electrical Power Windows Body >> 51 37 261 Removing And Installing/Replacing Window Cavity Cover Strip For Door Window, Rear Left Or Right

51 37 261 Removing And Installing/Replacing Window Cavity Cover Strip For Door Window, Rear Left Or Right

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Removing roller cover from luggage compartment, refer to Owner's handbook.

Fold rear-seat backrest forwards.

Remove panel for roof pillar at rear (C-pillar). Refer to 51 43 251 REMOVING AND INSTALLING/REPLACING TRIM PANEL FOR LEFT OR RIGHT REAR ROOF PILLAR (C-PILLAR) .

Remove panel for roof pillar at rear (D-pillar). Refer to 51 43 252 REMOVING AND INSTALLING/REPLACING PANEL FOR REAR ROOF PILLAR (D-PILLAR), LEFT OR RIGHT .

Remove screws (1 and 2).

Fig 1: Removing Window Cavity Cover Strip
G03268348Courtesy of BMW OF NORTH AMERICA, INC.

Remove window cavity cover strip (3).

Installation: 

Slide guides (1) into mounts of window frame.

Fig 2: Installing Guides
G03268349Courtesy of BMW OF NORTH AMERICA, INC.

Press guides (2) onto mount for window cavity cover strip.