11 37 006 Removing and installing/replacing left eccentric shaft (N62 from 9/03): Notes
WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
(cylinder bank 5 to 8)
Remove servomotor for left eccentric shaft.
Remove ignition coils on cylinder bank 5 to 8. See IGNITION COIL .
Remove spark plugs on cylinder bank 5 to 8.
Remove left cylinder head cover .
Remove inlet and exhaust adjustment unit on left side.
Remove left inlet camshaft.
Eccentric shafts from 2/2003:
NOTE:
Eccentric shafts of cylinders 1 to 4 and 5 to 8 are identical parts.
IMPORTANT:
Note installation direction of eccentric shafts.
Depending on the side on which the magnet wheel is fitted, the eccentric shafts are used for cylinders 1 to 4 or 5 to 8.
Incorrect assembly will result in engine damage.
Depending on the side on which the magnet wheel is fitted, the eccentric shafts are used for cylinders 1 to 4 or 5 to 8.
Incorrect assembly will result in engine damage.