11 36 048 Removing and installing/replacing inlet and exhaust adjustment units on right side (N62): Notes

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 9 190
11 9 460
11 9 461
11 9 462
11 9 463

(cylinder bank 1 to 4)

Read fault memory and make a documentary record.

Remove servomotor for right eccentric shaft.

Remove right cylinder head cover

Remove all spark plugs on cylinder bank 1 to 4.

If necessary, remove fan cowl.

Remove right timing case cover .