11 78 543 Replacing right oxygen monitor sensor (N62)

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 7 030

Necessary preliminary tasks:

Check function of DME.
Switch off ignition.

WARNING: Scalding hazard!
Only perform this task on an engine that has cooled down.

Unlock and detach plug connection (1) for monitor sensor (2).

Unclip monitor sensor cable from fixtures (3). Release monitor sensor (2) with special tool 11 7 030.

Fig 1: Unclipping Monitor Sensor Cable From Fixtures And Releasing Monitor Sensor

Courtesy of BMW OF NORTH AMERICA, INC.