34 11 Front Brake
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKE TIGHTENING SPECIFICATION
| Application | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Brake disk to wheel hub (contact faces between brake disk and wheel hub cleaned and grease-free) | All | 16 Nm | ||
| 2AZ Brake caliper to steering knuckle (screws lightly oiled, contact surfaces between brake caliper and steering knuckle cleaned and grease-free) | E34, E36, E32, E31, E38, E39, E46, E52, E53, E30 / 325iX, E65, E66, E67, E83, E85, E60, E61, E63, E64 | 110 Nm | ||
| 2AZ with aluminum brake caliper | E31 | 115 Nm | ||
| E12, E21, E23, E24 to 5.82 | 95 Nm | |||
| E28, E30, E24, from 5.82 | 123 Nm | |||
| 3AZ Guide bolt | All | wrench size 7 mm | 30 - 5 Nm | |
| 4AZ Bolts to guidepin (always replace) | E30 | 35 Nm | ||
| 5AZ Protective plate to steering knuckle | E85, E83 | M6 | 9 Nm | |
| E67, E60, E61, E63, E64, E65, E66 | M6 | 12 Nm |