17 22 Oil Cooler Pipes
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
OIL COOLER PIPES TIGHTENING SPECIFICATIONS (1 OF 2)
| Application | Type | Thread | Measure |
|---|---|---|---|
| 1AZ Pipes to engine oil cooler | All | 28 Nm | |
| 2AZ Pipes to oil filter head | E36 / M3 | 25 Nm | |
| 3AZ Holder on oil cooler pipes | All | 6 Nm | |
| 4AZ Holder for oil cooler pipes to alternator | E36 / M3 | M6 | 10 Nm |
OIL COOLER PIPES TIGHTENING SPECIFICATIONS (2 OF 2)
| Application | Type | Thread | Measure |
|---|---|---|---|
| 5AZ Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm |
| 5HP30 | M22 x 1.5 | 28 Nm | |
| 6AZ Oil lines on transmission | |||
| Hollow bolt | All | M16 x 1.5 | 37 Nm |
| 7AZ Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | |
| Hollow bolt | All | M14 x 1.5 | 27 Nm |
| 8AZ Screw-in fitting on transmission | All | M14x1.5 und M16x1.5 | 37 Nm |
| 9AZ Oil hose on oil pipe | E23 | 28 Nm | |
| 10AZ Oil pipe bracket on radiator | E23 | 2 Nm | |
| 11AZ Oil pipe bracket on body | E23 | 6.5 Nm | |
| 12AZ Oil cooler on transmission | 5HP30 | 10 Nm | |
| 13AZ Transmission oil cooler line to transmission | N42 | M8 | 21 Nm |