LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (General Electrical System - Service Techniques) >> Power supply E60, E61, E63, E64 >> Terminal 30g relay

Terminal 30g relay

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2006 BMW Z4, 2006 BMW M3, 2006 BMW M Roadster, 2006 BMW M Coupe, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

The terminal 30g relay prevents a higher off-load current, e.g. one caused by a defective consumer, with a predefined consumer shutoff. The terminal 30g relay is actuated by the CAS. The "g" indicates that terminal 30g is an active terminal.

The connections switched on and off with the terminal 30g relay on the rear power distributor are shown on the system circuit diagram.

For more information, refer to POWER SUPPLY, SYSTEM OVERVIEW: E60, E61, E63, E64 .

scientia non olet · About LEMON Manuals