11 25 Pistons with Rings and Pins N62 B36
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS WITH RINGS AND PINS N62 B36 SPECIFICATIONS
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 11 |
| Piston diameter at measuring point "A" | ||
| Original, stage 0 (new dimension) | mm | 83.985 +/- 0.014 |
| Oversize, stage 1 (new dimension) | mm | 84.235 +/- 0.014 |
| Oversize, stage 2 (new dimension) | mm | 84.485 +/- 0.014 |
| Piston installation clearance (piston new) | mm | 0.001 ... 0.044 |
| Piston installation clearance (piston worn) | mm | 0.026 ... 0.073 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |