11 11 Engine Block, Cylinder Crankcase N62 B36
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE N62 B36 SPECIFICATIONS
| Bore "OSLASH" stage 0 (1) | mm | 84.000 +0.014 | ||
| Bore "OSLASH" stage 1 (1) | mm | 84.250 +0.014 | ||
| Bore "OSLASH" stage 2 (1) | mm | 84.500 +0.014 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.007 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 | ||
|
||||