11 12 Cylinder Head with Cover N62
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER N62 SPECIFICATIONS
| Cylinder head height: Original dimension | mm | 133.0 +/- 0.07 |
| Machining limit | mm | 132.7 +/- 0.07 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035 ... 13.993 |